KCLUG

1 participants
3235 discussions

"Linux" radio, one more time
by Richard A. Franklin 04 Feb '05

04 Feb '05

Thanks for all the good feedback on Internet radio! While playing with a FreeSBIE live CD (9-27-04 release, sporting an Italian flag) on an old computer last night, I found a very usable streaming broadcast browser: http://www.nongnu.org/streamtuner/ which requires: http://streamripper.sourceforge.net/ It isn't quite iTunes, but hey, it does the job quite well. AND, it was fun to see how well FreeBSD found old hardware, found the dhcp server, and played music. (I was actually trying out a few distros in my spare time over the past few weeks, to see if anything is fast enough to use as a desktop on a PII 400, 128MB system. So far, the rpm distros are about equally slow, Knoppix installed well, but is only slightly faster, Slackware is somewhat faster ... but VectorLinux, which is a Slack variant, is by far the fastest ... VERY fast, actually, considering the hardware ... seems that it is designed for older hardware. Of course, choice of graphical interface is always a factor.). Rick

5 7

RE: [OT] Missing baryons found!
by Brian Densmore 03 Feb '05

03 Feb '05

> -----Original Message----- > From: Jason Clinton > > For the geeks among us: there was some really exciting news > in Nature this > morning. Astronomers have located the missing ~30-40% of the baryonic > (normal) matter in the universe. It's especially cool because > it matched > predictions. > > Here is the article: > <http://www.nature.com/cgi-taf/DynaPage.taf?file=/nature/journal/v433/n7025/…> > > And the paper: > <http://www.nature.com/cgi-taf/DynaPage.taf?file=/nature/journal/v433/n7025/…> > > This significantly increases the probability that the standard cosmological > model is correct. > > The next thing to look for is 'sinks' of dark matter at the ends of these > baryonic filaments pulling them apart. The picture is starting to look as > though the universe is covered in dark matter points with baryonic filaments > interconnecting them like a web and galaxies interspersed in the empty space > between. Does that mean I have to turn the point singularity I wear on a necklace around my neck? Nice to know they might actually be right about the Universe a little though.

1 0

[OT] Missing baryons found!
by Jason Clinton 03 Feb '05

03 Feb '05

For the geeks among us: there was some really exciting news in Nature this morning. Astronomers have located the missing ~30-40% of the baryonic (normal) matter in the universe. It's especially cool because it matched predictions. Here is the article: <http://www.nature.com/cgi-taf/DynaPage.taf?file=/nature/journal/v433/n7025/…> And the paper: <http://www.nature.com/cgi-taf/DynaPage.taf?file=/nature/journal/v433/n7025/…> This significantly increases the probability that the standard cosmological model is correct. The next thing to look for is 'sinks' of dark matter at the ends of these baryonic filaments pulling them apart. The picture is starting to look as though the universe is covered in dark matter points with baryonic filaments interconnecting them like a web and galaxies interspersed in the empty space between.

1 0

RE: Old Hardware
by Brian Densmore 03 Feb '05

03 Feb '05

> -----Original Message----- > From: Jonathan Hutchins > > On Thursday 03 February 2005 09:57 am, you wrote: > > > You can strip the debug code out of compiled gentoo programs. > > Sure. By recompiling them. > > Were you thinking of some other method? Yes, a utility called "strip" will strip the debugging headers out of code. It make the programs smaller and often faster. It doesn't recompile the code. Don't ask me how, I haven't bothered to look at the code. It can be done with any Linux distro, but it makes debugging impossible, so use with caution. I think they recommend against stripping the kernel. ;') > > > Also, it would require an expert to know what flags to set > to optimize > > compiling. > > Actually, this is one thing I _have_ been able to find a lot > of information > about in the gentoo forums, as well as some other on-line > forums. Googling > for "use flags" and your architecture will find a lot of > discussion and > advice. Yes, but you have to use them, and you haven't given us poor souls the magic combination. So anyone just pulling down gentoo and compiling wouldn't necessarily know how to optimize. So to say "compile gentoo, don't use compiled gentoo" does nothing to improve the speed of the installed system. Now if you had said "compile gentoo with the compile options -abc#@$%%%^$###..., don't use compiled gentoo", or something similar, then I might agree with you. But I doubt it. I'm skeptical of how much more performance you can get out of gentoo by compiling as opposed to using their pre-optimized binaries. At least not with older stock equipment.

1 0

Re: Old Hardware
by Jonathan Hutchins 03 Feb '05

03 Feb '05

On Thursday 03 February 2005 09:57 am, you wrote: > You can strip the debug code out of compiled gentoo programs. Sure. By recompiling them. Were you thinking of some other method? > Also, it would require an expert to know what flags to set to optimize > compiling. Actually, this is one thing I _have_ been able to find a lot of information about in the gentoo forums, as well as some other on-line forums. Googling for "use flags" and your architecture will find a lot of discussion and advice. Since the flags are actually gcc compile flags, the discussion extends beyond gentoo.

1 0

High Altitude Glider Project
by Brian Kelsay 03 Feb '05

03 Feb '05

As mentioned at Denny's last night: http://members.shaw.ca/sonde/index.htm I was talking about a self-guided glider someone designed to be launched at 85,000 ft from a weather balloon and a few people were intrigued. It has an on-board PC-104 form PC for guidance with GPS, temp sensors, packet radio modem, electronic compass, web cam and runs rom-dos. Lots of cool pictures and details. Brian Kelsay

1 0

RE: Cheap Linux-compatible printer?
by kurt＠verruckt.org 02 Feb '05

02 Feb '05

-----Original Message----- From: Brian Kelsay [mailto:[email protected]] Sent: Wednesday, February 02, 2005 12:41 PM To: kurt(a)verruckt.org Subject: RE: Cheap Linux-compatible printer? What's your opinion of the 5P? I have one of those, but have not used it much since I got it used. Brian Kelsay --- I love the little HP *p printers. They are small, durable, and very easy to maintain. They will last YEARS in a home environment. I only said the 3p and 4p because they would be older, and pretty cheap. The 5 and 6p's are nice for sure. I have a 4p and have nothing to complain about it. Kurt --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.853 / Virus Database: 581 - Release Date: 2/1/2005

1 0

Re: Cheap Linux-compatible printer?
by Brian Kelsay 02 Feb '05

02 Feb '05

Now that the Surplus Exchange Bldg. has been damaged I wonder if they will have an actual fire sale. They may have to clear space prior to repairing the building, unless everything melted. Brian Kelsay

2 1

RE: Cheap Linux-compatible printer?
by Brian Densmore 02 Feb '05

02 Feb '05

You haven't been able to find HP printers that are Linux compatible? I find that hard to believe. I have one and it works great, in fact I have two hooked up and they work great. As far as cheap ink. Well, there in lies the problem of your request. As has been said the current selection of cheap printers all have expensive ink. You might want to google for "inexpensive ink printers review Linux" or something like that to find reviews of cost to maintain ink jet printers. If you want a good printer, supported by Linux and cheap ink. Find an older HP LaserJet in some of the area used PC shops. I have an older LaserJet II or III (can't remember). I paid $25 for it, It's big and it is jamming, so you have to disassemble and clean it good. As is it'll will take one page at a time fed in manually. I've been to lazy to clean it. Ink isn't cheap, but last for a long time so comparatively it's cheap. It's yours if you want it. I have a Canon BJ 10e you can have, no charge. It's DOS compatible, cheap ink, slow, small footprint, old. I'm not even sure it does letter quality. I'd hate to feed it a 50 page document. I have a Lexmark 4 color printer, ink is not cheap, and I think you'd have to set it up in Windows and install the software to diagnose why it's suddenly printing in reverse colors. Lexmark does have a closed source driver for it, and there are open source drivers for it too. You could always use it as a black ink printer. It's fairly fast, and costs more than $50 new. You can have that one too, I keep it around saying someday I'm going to diagnose what is wrong with it. It's a nice printer and prints excellent quality photos with photo ink. If you can get it to work properly. Brian Densmore > -----Original Message----- > From: Leo Mauler > > Basically I'm wanting to set up a home Linux printer > server just so I can say I've done it once. > > I'm looking around for a $50 or less printer which is > Linux compatible (I'd take "DOS compatibility mode") > or even has Linux drivers. The printers I've been > able to find in that range (Canon, HP, Lexmark) all > seem to have neither DOS compatibility mode nor Linux > drivers. > > I have about $50 to spend so I won't be able to take > advantage of "this is the price after a mail-in > rebate" pricing. I'd take a used printer if the > cartridges aren't too hard to find and/or too > expensive.

1 0

Spuirrelmail security update
by Brian Densmore 01 Feb '05

01 Feb '05

Anyone running Squirrelmail in debian may want to apply the new patch. It fixes several remote exploits. Also I suspect there may be patches for other distros. Brian Densmore

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

KCLUG