KCLUG

1 participants
3235 discussions

Re: [KULUA] How to tell what's stock and what's added in *buntu?
by Kendric Beachey 05 Aug '10

05 Aug '10

Awesome, that's probably what I will go with, thanks Paul! (rather than doing something with R, I will probably just diff the two files and see about scripting something with the result.) Kendric Beachey On Wed, Aug 4, 2010 at 5:07 PM, Paul Johnson <pauljohn(a)ku.edu> wrote: > On 08/04/2010 03:17 PM, Kendric Beachey wrote: > > >> The thing I would like to do is get a list of the various pieces of >> software I've installed over and above the stock selection that ships with >> Edubuntu, so I can reduce the time spent redoing all that installation work. >> Does anyone know of a good way to get the system to tell you a list of all >> the .debs you have installed beyond what it shipped with? >> >> > I think you have the right strategy. I've done this on rpm based systems, > now I'm running Ubuntu, I know I've seen a standard routine for this in the > ubuntu mailing list. I will check and see. > > Here's what I would do in the short term, just because I can. > > Do I understand it right that you want to know what packages you have now > (or do you mean the packages you used to have?) > > If the answer is "now", I'd do this: > > dpkg -l > > that spits out everything you have, like > > > ii xserver-xorg-vid 1:1.7.3-1 X.Org X server -- SiliconMotion > display driver > > Divert that output to a file > > dpkg -l >> mydebs.txt > > After you install fresh, do the same > > > dpkg -l >> mynewdebs.txt > > I'd then use some program to get the items that are in mydebs.txt that are > not in mynewdebs.txt. > > I'd probably do that with R, but I bet you'd get it done easily with a > spreadsheet. > > pj > > > Thanks! >> >> Kendric Beachey >> >> >> > -- > Paul E. Johnson email: pauljohn(a)ku.edu > Professor, Political Science http://pj.freefaculty.org > Assoc. Director, Center for Research Methods and Data Analysis > 1541 Lilac Lane, Rm 504 > University of Kansas Office: (785) 864-9086 > Lawrence, Kansas 66045-3129 FAX: (785) 864-5700 > > > -- > You received this message because you are subscribed to the Google Groups > "kulua-l" group. > To post to this group, send email to kulua-l(a)googlegroups.com. > To unsubscribe from this group, send email to > kulua-l+unsubscribe(a)googlegroups.com<kulua-l%2Bunsubscribe(a)googlegroups.com> > . > For more options, visit this group at > http://groups.google.com/group/kulua-l?hl=en. > >

2 2

How to tell what's stock and what's added in *buntu?
by Kendric Beachey 04 Aug '10

04 Aug '10

My daughter's Edubuntu machine had some slight issues during the upgrade from 9.10 to 10.04. It was alllllmost done with the upgrade (percentage in the upper 90s) when it locked up hard and all I could do was reset it. I thought maybe I'd have to do the upgrade over but from that point on it has operated as a 10.04 machine. That was early May. Everything seems to work for the most part, although while booting up and shutting down, it has a text-based screen instead of the graphical one. Also the sound has some real hiccups, at least during login, and it's been having some stone cold lockups lately, especially while doing lengthy network-intensive operations. I could try to fix it as it stands, but at this point I'd rather do a fresh install. I've got the Edubuntu 10.04 dvd on the desk, and /home is on its own partition, so the data there will survive and I'll just have to recreate the user accounts. The thing I would like to do is get a list of the various pieces of software I've installed over and above the stock selection that ships with Edubuntu, so I can reduce the time spent redoing all that installation work. Does anyone know of a good way to get the system to tell you a list of all the .debs you have installed beyond what it shipped with? Thanks! Kendric Beachey

1 0

attention
by David Nicol 02 Aug '10

02 Aug '10

http://www.ncomputing.com/Partners/Findareseller.aspx

4 4

Re: [KULUA] iftop command
by Kendric Beachey 15 Jul '10

15 Jul '10

Very nice, thanks! Kendric Beachey On Thu, Jul 15, 2010 at 2:06 PM, David Mangiaracino <davidmango(a)gmail.com>wrote: > from man page > -P Turn on port display. > -N Do not resolve port number to service names > I think that would help find it since you would have the port number > > then lsof -i :port > > > On Thu, Jul 15, 2010 at 1:42 PM, Kendric Beachey < > kendric.beachey(a)gmail.com> wrote: > >> Recently I had a ton of network traffic going in and out of my machine >> and I couldn't figure out why. A co-worker pointed me to this tool: >> >> http://www.ex-parrot.com/pdw/iftop/ >> >> It's apparently at least 4 years old, and may be well known to a bunch of >> folks this email will reach, but it was new to me and I found it useful, so >> I thought I'd share. >> >> Does anyone know of a tool that tells you which process is generating >> network traffic? iftop just shows which hosts it's going to/from, which was >> enough for me to figure out who the culprit was in this case. >> >> Kendric Beachey >> >> -- >> You received this message because you are subscribed to the Google Groups >> "kulua-l" group. >> To post to this group, send email to kulua-l(a)googlegroups.com. >> To unsubscribe from this group, send email to >> kulua-l+unsubscribe(a)googlegroups.com<kulua-l%2Bunsubscribe(a)googlegroups.com> >> . >> For more options, visit this group at >> http://groups.google.com/group/kulua-l?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "kulua-l" group. > To post to this group, send email to kulua-l(a)googlegroups.com. > To unsubscribe from this group, send email to > kulua-l+unsubscribe(a)googlegroups.com<kulua-l%2Bunsubscribe(a)googlegroups.com> > . > For more options, visit this group at > http://groups.google.com/group/kulua-l?hl=en. >

1 0

iftop command
by Kendric Beachey 15 Jul '10

15 Jul '10

Recently I had a ton of network traffic going in and out of my machine and I couldn't figure out why. A co-worker pointed me to this tool: http://www.ex-parrot.com/pdw/iftop/ It's apparently at least 4 years old, and may be well known to a bunch of folks this email will reach, but it was new to me and I found it useful, so I thought I'd share. Does anyone know of a tool that tells you which process is generating network traffic? iftop just shows which hosts it's going to/from, which was enough for me to figure out who the culprit was in this case. Kendric Beachey

2 1

Fwd: WikiLeaks may be under attack
by David Nicol 16 Jun '10

16 Jun '10

---------- Forwarded message ---------- From: WikiLeaks <wl-office(a)sunshinepress.org> Date: Tue, Jun 15, 2010 at 4:10 AM Subject: WikiLeaks may be under attack To: some pseudonym or other WikiLeaks may be under attack. You were generous enough to write to us, but we have not had the labor resources to respond. Your support is important to us. Please read all of this email to understand what is going on. We apologize for not getting back to you before. It is not through any lack of interest on our part, but an enforced lack of resources. One of our alleged sources, a young US intelligence analyst, Bradley Manning, has been detained and shipped to a US military prison in Kuwait, where he is being held without trail. Mr. Manning is alleged to have acted according to his conscious and leaked to us the Collateral Murder video and the video of a massacre that took place in Afghanistan last year at Garani. The Garani massacre, which we are still working on, killed over 100 people, mostly children. Mr. Manning allegedly also sent us 260,000 classified US Department cables, reporting on the actions of US Embassy's engaging in abusive actions all over the world. We have denied the allegation, but the US government is acting as if the allegation is true and we do have a lot of other material that exposes human rights abuses by the United States government. Mr. Manning was allegedly exposed after talking to an unrelated "journalist" who then worked with the US government to detain him. Some background on the Manning case: http://fdlaction.firedoglake.com/2010/06/11/transcript-daniel-ellsberg-says… http://en.wikipedia.org/wiki/Bradley_Manning http://www.wired.com/threatlevel/2010/06/leak/ http://www.wired.com/threatlevel/2010/06/wikileaks-chat/ http://www.wired.com/threatlevel/2010/06/state-department-anxious/ http://www.state.gov/r/pa/prs/dpb/2010/06/143011.htm [ note that there are some questions about the Wired reportage, see: http://www.boingboing.net/2010/06/13/video-wikileaks-foun.html#comment-8096… ] WikiLeaks a small organization going through enormous growth and operating in an adverserial, high-security environment which can make communication time consuming and the acquisition of new staff and volunteers, also difficult since they require high levels of trust. To try and deal with our growth and the current difficult situation, we want to get you to work together with our other supporters to set up a "Friends of WikiLeaks" group in your area. We have multiple supporters in most countries and would like to see them be a strong and independent force. Please write to friends(a)sunshinepress.org if you are interested in helping with Friends of WikiLeaks in your area. You will receive further instructions. We also have significant unexpected legal costs (for example flying a legal team to Kuwait, video production. Collateral Murder production costs were $50,000 all up). Any financial contributions will be of IMMEDIATE assistance. http://wikileaks.org/wiki/Special:Support Please donate and tell the world that you have done so. Encourage all your friends to follow the example you set, after all, courage is contagious. Julian Assange Editor in Chief WIKILEAKS

1 0

Synology & Fsck
by Sean Crago 06 Jun '10

06 Jun '10

If the list is coming back to life, then I've got a weird but hopefully simple problem for you: I've got a Synology DiskStation DS209 NAS that's giving me erroneous free space readings, or erroneous du output. On installation, it dedicated 2.4GB to its root partition /dev/md0 and according to du -cx / is using less than 587192K of that space. Unfortunately, however, df says it's full. bash-3.2# df -k Filesystem 1K-blocks Used Available Use% Mounted on rootfs 2451064 2425764 0 100% / /dev/root 2451064 2425764 0 100% / bash-3.2# mount /dev/md0 on / type ext3 (rw,data=ordered) As a result, any number of apps from the stock firmware are prevented from running and those that do hobble along spam the logs to the point of uselessness w/complaints. The catch? I can't find a safe way to fsck it. Conventional shutdown commands to force a fsck aren't an option/are just plain missing on the box. Using tune2fs to set the check interval ridiculously low to force a check upon reboot similarly didn't work. Unfortunately, the ARM-based architecture also doesn't support booting to a removable USB device, knocking out the only other safe way I can think of to fsck it. Pop new firmware on to start from scratch? I'd love to at this point, but the firmware installation process requires 1024 megs of free disk space. Thoughts? Any ideas on how to safely get it cleaned up and accurately reporting its free space while the root filesystem is live and booted? -Sean

3 5

packed permission bits in file systems?
by David Nicol 03 Jun '10

03 Jun '10

http://en.wikipedia.org/wiki/Talk:Filesystem_permissions#Packed_permission_… Clearly, ext3 has moved beyond "packed permission bits" if that ever was a production concept. [david@hexaflexagon scrabble]$ touch BLOP [david@hexaflexagon scrabble]$ ls -l BLOP -rw-r--r-- 1 david david 0 Jun 3 04:11 BLOP [david@hexaflexagon scrabble]$ chmod o+x BLOP [david@hexaflexagon scrabble]$ ls -l BLOP -rw-r--r-x 1 david david 0 Jun 3 04:11 BLOP [david@hexaflexagon scrabble]$ Under packed permissions, granting for OTHERS would grant for USER and GROUP too. Here's my question: When did packed permissions stop being used, if they ever were? Does anyone else remember "chmod o+w foo" silently implying "chmod ugo+w foo" and if so how log ago was that? -- "I'm not giving in an inch to fear" --David Crosby

4 4

Re: Synology & Fsck
by Kelsay, Brian - Kansas City, MO 02 Jun '10

02 Jun '10

Are there any temp files or old logs that you can delete to free up space for fresh firmware? -------------------------- Brian Kelsay Sr. IT Support Specialist Anadarko Industries Inc. working for Technical Support Division (TSD) USDA/OCIO/ITS/TSD/LO-KC Office: 816-823-4859 Mobile: 816-769-5615 Email: brian.kelsay(a)kcc.usda.gov Message Sent using BlackBerry Device ________________________________ From: kclug-bounces(a)kclug.org <kclug-bounces(a)kclug.org> To: KCLUG <kclug(a)kclug.org> Sent: Wed Jun 02 12:08:30 2010 Subject: Re: Synology & Fsck On Wed, Jun 2, 2010 at 10:47 PM, Sean Crago <cragos(a)gmail.com<mailto:[email protected]>> wrote: If the list is coming back to life, then I've got a weird but hopefully simple problem for you: I've got a Synology DiskStation DS209 NAS that's giving me erroneous free space readings, or erroneous du output. On installation, it dedicated 2.4GB to its root partition /dev/md0 and according to du -cx / is using less than 587192K of that space. Unfortunately, however, df says it's full. bash-3.2# df -k Filesystem 1K-blocks Used Available Use% Mounted on rootfs 2451064 2425764 0 100% / /dev/root 2451064 2425764 0 100% / bash-3.2# mount /dev/md0 on / type ext3 (rw,data=ordered) As a result, any number of apps from the stock firmware are prevented from running and those that do hobble along spam the logs to the point of uselessness w/complaints. The catch? I can't find a safe way to fsck it. Conventional shutdown commands to force a fsck aren't an option/are just plain missing on the box. Using tune2fs to set the check interval ridiculously low to force a check upon reboot similarly didn't work. Unfortunately, the ARM-based architecture also doesn't support booting to a removable USB device, knocking out the only other safe way I can think of to fsck it. Pop new firmware on to start from scratch? I'd love to at this point, but the firmware installation process requires 1024 megs of free disk space. Thoughts? Any ideas on how to safely get it cleaned up and accurately reporting its free space while the root filesystem is live and booted? -Sean Oh, and I really doubt this changes the solution, but for full disclosure's sake: Last change I made to the system was to install the ipkg for mlocate, which stores its small 500k db on a different partition. Also, power situation is abysmal here, and I'm not convinced it's shutting down properly when it detects that it's on UPS power.

2 2

Re: Where is everyone?
by Kelsay, Brian - Kansas City, MO 31 May '10

31 May '10

What would civicrm do for me? -------------------------- Brian Kelsay Sr. IT Support Specialist Anadarko Industries Inc. working for Technical Support Division (TSD) USDA/OCIO/ITS/TSD/LO-KC Office: 816-823-4859 Mobile: 816-769-5615 Email: brian.kelsay(a)kcc.usda.gov Message Sent using BlackBerry Device ----- Original Message ----- From: jamesmikedupont(a)googlemail.com <jamesmikedupont(a)googlemail.com> To: Kelsay, Brian - Kansas City, MO Cc: kclug(a)kclug.org <kclug(a)kclug.org> Sent: Mon May 31 09:42:50 2010 Subject: Re: Where is everyone? also gnucash is not bad, civicrm is also floss... but civicrm is not good if you dont feed it. gnucash is very nice. mike On Mon, May 31, 2010 at 4:40 PM, Kelsay, Brian - Kansas City, MO <brian.kelsay(a)kcc.usda.gov> wrote: > Nope, put I'm interested in using FOSS for this, keeping it simple and portable. I need to keep it small enough to backup to pen drive and easy (straightforward) enough that anyone else could pick it up and do it if I croak. > > After I got the main spreadsheet done, I tried to do a database, but it is way overkill and too much work for same result. I was dragging sheets to Base to create tables and it was a royal PITA. > > I have a workbook with 50 or so tabs (sheets). One for each boy and then a totals tab where I gather a running balance of all boys accounts for monthly reporting. > > Pretty good for a guy that never had any accounting training. I took over and everything was on ledger paper accounting sheets and you had to manually calculate everything. PITA. > -------------------------- > Brian Kelsay > Sr. IT Support Specialist > Anadarko Industries Inc. working for > Technical Support Division (TSD) > USDA/OCIO/ITS/TSD/LO-KC > Office: 816-823-4859 > Mobile: 816-769-5615 > Email: brian.kelsay(a)kcc.usda.gov > Message Sent using BlackBerry Device > > > ----- Original Message ----- > From: jamesmikedupont(a)googlemail.com <jamesmikedupont(a)googlemail.com> > To: Kelsay, Brian - Kansas City, MO > Cc: kclug(a)kclug.org <kclug(a)kclug.org> > Sent: Mon May 31 09:17:54 2010 > Subject: Re: Where is everyone? > > have you looked at civicrm , it might be useful for that as well. > mike > > On Mon, May 31, 2010 at 4:12 PM, Kelsay, Brian - Kansas City, MO > <brian.kelsay(a)kcc.usda.gov> wrote: >> While I haven't done much with Linux lately I have been doing a bunch with OO.o (openoffice.org). >> >> In Jan, I took over the Treasurer position in our boy scout troop. I have created several spreadsheets in OO.o to track money and payments for various things. Then I cleaned up the main accounting spreadsheet, added notes and examples and posted it as a template for others to use on OO.o. >> >> So, open source accounting for non-profit BSA troop. >> >> Brian Kelsay >> -------------------------- >> Brian Kelsay >> Sr. IT Support Specialist >> Anadarko Industries Inc. working for >> Technical Support Division (TSD) >> USDA/OCIO/ITS/TSD/LO-KC >> Office: 816-823-4859 >> Mobile: 816-769-5615 >> Email: brian.kelsay(a)kcc.usda.gov >> Message Sent using BlackBerry Device >> >> >> ----- Original Message ----- >> From: kclug-bounces(a)kclug.org <kclug-bounces(a)kclug.org> >> To: Duane Attaway <dattaway(a)dattaway.net> >> Cc: KCLUG (E-mail) <kclug(a)kclug.org> >> Sent: Mon May 31 08:56:26 2010 >> Subject: Re: Where is everyone? >> >> hi, >> I am working on a new project to port josm from openstreetmap (the >> java desktop map editor ) to gwt, the google webtoolkit, >> all help appreciated >> http://osmopenlayers.blogspot.com/2010/05/next-version-of-gwtosm.html >> >> On Mon, May 31, 2010 at 3:50 PM, Duane Attaway <dattaway(a)dattaway.net> wrote: >>> Did the Year of the Linux Desktop pass by? Linux finally achieve World >>> Domination? Is Microsoft now selling Linux? The last bug in the lkml get >>> closed? >>> >>> This mailing list used to be hopping every day. >>> _______________________________________________ >>> KCLUG mailing list >>> KCLUG(a)kclug.org >>> http://kclug.org/mailman/listinfo/kclug >>> >> _______________________________________________ >> KCLUG mailing list >> KCLUG(a)kclug.org >> http://kclug.org/mailman/listinfo/kclug >> _______________________________________________ >> KCLUG mailing list >> KCLUG(a)kclug.org >> http://kclug.org/mailman/listinfo/kclug > _______________________________________________ > KCLUG mailing list > KCLUG(a)kclug.org > http://kclug.org/mailman/listinfo/kclug

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

KCLUG